Although a new miter saw needs a sturdy miter saw stand in order to operate efficiently, not every stand available is ideal for every person. Regardless of whether you’re a DIY enthusiast or a professional workman, you are going to want to find a stand that matches your own particular needs. It doesn’t matter if you a stand that’s more portable than durable, or one that allows your saw to deliver more capacity than versatility.
Of course, there are a lot of stands which can handle several different tasks and do it quite well. In fact, we’ve reviewed ten of the best miter saw stands and have listed them below for our reader’s convenience. Anyone of the following stands is ready to deliver its own blend of portability, durability, versatility, and capacity. And this allows the person using it to get the most out of their saw and get their job done effectively.
Best Miter Saw Stands – Top List
10Powertec MT4000 Deluxe
This mobile miter saw stand is designed to not only provide the support needed by a miter saw operator, but to also be portable as well. It is constructed with round steel tubing that allows it to hold most 10-inch and 12-inch saws and is capable of holding up to 330-pounds of weight. It also has 8-inch rubber wheels that make it easy to move the stand from one location to the next. And when it’s time to set up the stand, its spring-loaded legs lock easily into place. The final feature found on this innovative stand is its two 11.5-inch steel rollers which help to give the operator a nice, smooth feed.
9Genesis GMSS400W Heavy-Duty
Designed to provide the operator with the support they need to perform repetitive cuts, this heavy-duty stand is ready to perform. It is made with an extremely durable and sturdy construction which can easily hold up to 400-pounds and has quick-release mounting brackets that make the miter saw easy to mount and remove. Although this stand is created for use with Genesis 12-inch sliding miter saws, it is capable of handling a couple of other saw models. It also has a quick-fold design that makes it easy to store and wheels that make it extremely portable. And since it uses tool-free adjustments, it’s easy to use as well.
8General International MS3102
Manufactured with a tubular steel frame that features dual cross bars and 1.5-inch diameter legs, this saw stand is ready to do a great job. It has a universal design that allows it to fit most saws and it’s capable of holding up to 330-pounds of weight. It is approximately 79-inches when fully extended and is only 46-inches after it’s been retracted. This stand also features 8-inch wheels which allow it to be easily moved from one location to the next. Other features found on this stand include a lever-actuated quick release mounting system and a 35-inch work height to reduce strain on the operator’s back.
7Toughbuilt 124-Inch Stand
It doesn’t matter if the operator uses this stand with a Toughbuilt miter saw or if it’s used with one of the many other saws available because this stand has universal compatibility and can be used with almost any miter saw. It has material supports that extend to 124-inches, has 8.3-inch rubber tires which can traverse rough terrain and heavy-duty steel construction that can hold material weight quite easily. Additional features found on this model include quick-release leg locks, left and right work-stops, quick-release tool mounts and rugged tool mount twist locks. And it also has a foot-pedal lock release that keeps the operator’s hands-free.
6Dewalt DWX726 Rolling Stand
Anyone who has needed a portable miter saw stand but didn’t have one will appreciate the features on the Dewalt DWX726. It’s manufactured with tubular steel construction that allows it to hold up to 300-pounds and it has a three-position system that raises or lowers the stand pneumatically. This product also has wheels which can be used on virtually any terrain and allows the stand to be easily moved to the job site. When it’s been unfolded, this stand is approximately 98-inches long and 32-inches wide. And since it has adjustable mounting rails, this stand can accommodate just about any miter saw.
5WEN MSA330 Collapsible Stand
This stand has a universal design that allows it to be used with most of the popular miter saws on the market today. It’s equipped with two 8-inch wheels that are designed to never go flat and provide the stand with the ability to be moved right to the worksite. This stand can also be easily collapsed for storage and features a 1.5-inch diameter steel frame that holds the miter saw 33-inches off of the ground. Onboard this stand are three 120-volt outlets, and it also features two table extensions and two quick-release brackets. And finally, it’s unique design provides support for boards up to 10.5-feet long.
4Bosch Portable Gravity-Rise Stand
Anyone who needs a stand that delivers performance may want to check out the Bosch Portable Gravity-Rise Stand. This stand is built with 8-inch wheels that allow it to be taken even over difficult terrain and even with a miter saw installed on it. Speaking of saws, this model is capable of mounting virtually any miter saw thanks to its rapid-release mounting system, this includes both Bosch saws and ones manufactured by other companies. Another key feature found on this stand is an integrated outfeed that provides up to 18-feet of material support capacity. Other features include adjustable telescoping legs that provide stability and an adjustable height-out feed.
3Bora Portamate PM-4000
Although this miter saw stand isn’t as portable as some of the other models featured, it is extremely durable and can handle big jobs quite easily. It has a 36-inch work height that keeps the operator from having to excessively bend while they’re operating their saw and provides stability needed to get the job done. This stand can easily hold up to 500-pounds, so it can be used for big jobs and has a 116-inch long material support system. Other features found on this durable and innovative stand include 20-inch quick tool mounts, folding legs and a powder coated steel finish for increased durability.
2Dewalt DWX724 Compact Stand
Using a universal design that allows it to be not only used with Dewalt miter saws but virtually any compatible miter saw available, this stand is useful for anyone looking to get the most out of their tools. It’s made from lightweight aluminum that only weighs about 30-pounds, so it can be taken anywhere but is capable of holding up to 500-pounds of material. It has a tool height of 32-inches, a tool width of 100-inches and has extension lock levers that allow the extensions to be secured quickly. Other featured found on this stand include leg lock levers for easy setup and work stops that can be adjusted anywhere along the rail.
1Dewalt DWX725B Heavy-Duty Stand
Even though this miter saw stand is made from lightweight aluminum that only weighs 15.4-pounds and has a width of 36-inches, it’s capable of handling up to 1,000-pounds of materials. This means that although it’s extremely portable and easy to transport, it’s also extremely tough and can be used even for heavy-duty jobs. It has legs that fold for easy storage but provide the support the stand needs. Another great feature found on this stand is that it has a transportation latch that allows pairs of stands to be transported together. All of these features make this stand one of the best ones currently available.