10 Best Sliding Compound Miter Saws in 2019 – Reviews

Just about everyone is familiar with a miter saw, but not as many people are familiar with a sliding compound miter saw. Although this tool does seem to have somewhat of an excessively large name, it’s truly a tool that belongs in every workshop. That’s because they have the versatility of a compound saw, but they have a radial arm saw that allows the blade to be moved backward and forwards. This can be used to increase the length of the cut quite easily. To illustrate the effectiveness of these miter saws, we’ve included the ten best ones below for our readers to check out.

Best Sliding Compound Miter Saws – Top List

10Makita LS1018 10-Inch Dual Slide

A powerful 13-Amp direct-drive motor drives the heart of this sliding compound miter saw and allows it to spin the cutting blade at up to 4,300 RPM. This tool also delivers exceptional cutting capacity and accuracy, too. Although it weighs under 50-pounds, it’s capable of delivering the cutting capacity you would expect out of one of these saws. And since it has a soft start, it starts smoother and doesn’t damage the material it’s cutting. Another great feature found on this saw is its electric brake that adds not only added performance to this saw but also improves safety conditions for the operator.

9Milwaukee 12-Inch Saw With Digital Miter

Although it doesn’t feature a laser line and costs more than mid-range sliding miters, this tool does provide professional results. It features a powerful 15-Amp motor that delivers 3.3-Hp of power and allows this tool to cut through a variety of hard lumber. It also features a miter angle fine adjust, a miter angle digital readout that’s accurate to 0.1 degree and dual integrated job lights to illuminate the workpiece. Another cool feature found on this tool is its integrated dust channel that’s capable of captures three-fourths of all of the dust and debris produced while cutting wood or other materials.

8Hitachi 9.2-Amp 8.5-Inch Saw

Weighing just over 31-pounds, the Hitachi C8FSE may be the lightest tool in this category and in its class. However, even though it weighs less than comparable miter saws doesn’t mean that it isn’t capable of delivering power because it is more than capable. This tool has a 1,050-Watt motor and has an 8.5-inch blade, so it’s capable of delivering a number of professional-quality cuts. This saw is able to cut crown molding and trim and to do a variety of crosscuts and of course, miters. Its gliding system allows large workpieces to be easily handled, which makes it a great tool for woodworkers, carpenters, and framers.

7Festool Kapex KS 120 (561287)

Although its price-tag may put it out of the reach of some people, this Festool sliding compound miter saw is truly a great saw that delivers professional results. It has a rail-forward design that allows it to retain a compact footprint but also gives it the precision the operator needs to perform complex cuts. This tool can be aligned from the left or the right using the dual laser, and it has a micro-adjustable bevel angle that can be operated via a rotary knob. Other features found on this saw include a saw diameter of 10.25-inches, a dust extraction hood, and a lightweight design.

6Hitachi 15-Amp 12-Inch Dual Bevel (C12RSH2)

What makes this Hitachi saw exceptional among most other miter saws is that it has a compact slide system that eliminates the need for rear clearance. This compact slide system allows the saw head to track precisely along its fixed rails, and thereby eliminating the need for clearance. Although its slide system is top notch, however, it’s not the only feature worth mentioning on this saw. It also has a 15-Amp motor that gives the blade plenty of power to go through tough woods, and it has a large sliding fence that allows crown molding up to 7.5-inches vertically to be cut.

5Bosch 120-Volt 12-Inch Saw

The power of this dual-bevel glide miter saw is derived from several of its key features. This includes its 14-inch expanded horizontal cutting capacity and its 6.5-inch crown capacity. It also has a patented axial-glide system that gives the operator a high level of control over their work, even when they’re working in smaller workshops. This tool also has a quick-release fence that can be aligned 90-degrees to the saw’s table. It’s also equipped with a base that makes it quite stable. And finally, this powerful tool also has an ergonomic trigger handle that makes it exceptionally easy to use, even for longer periods of time.

4DEWALT DWS780 12-Inch Double Bevel

Equipped with a razor sharp 12-inch carbide blade, an integrated XPS cross-cut positioning system, and powerful 15-Amp motor, this sliding compound miter saw is capable of handling almost any job thrown at it. This tool has sliding fences that are tall enough to support a 7.5-inch nested crown or 6.75-inch base molding vertically. This tool’s motor provides up to 3,800 RPM of no-low speed that can power through just about any wood. And this tool also hands a handle that makes it easy to use on a regular basis. All of which makes this a professional tool worth checking out.

3Dewalt DW717 10-Inch Double Bevel

As any carpenter or woodworker will attest, the size of a miter saw’s motor and blade are only two things that must be considered when buying one of these tools. It’s also important to consider the features which may or may not make one of these tools more accurate. For example, this tool has a special bevel detent system with seven positive stops that allow the operator to perform repeatable and reliable cuts again and again. It also has an adjustable stainless steel miter detent plate with eleven positive stops, and it has a 45-degree bevel cut capacity, too. Which all just mean that this tool is as accurate as it is powerful.

2Dewalt DWS709 12-Inch Saw

Portability, power, and accuracy are all well represented by this high-quality saw from Dewalt. It features a 15-Amp motor that delivers 3,800 RPM of no-load speed and has an oversized bevel scale. It also has sliding fences that are tall and is equipped with a special back fence design that allows it to make cuts that some other saws simply can’t replicate. This tool’s fence system is capable of supporting crown molding up to 5.5-inches and base molding up to 4.5-inches vertically. And this saw can miter 60-degrees to the right and 50-degrees to the left. And all of these features can be found on a machine that weighs just a little bit over 50-pounds.

1Dewalt DWS779 12-Inch Saw

A great number of different features can be found on this Dewalt sliding compound miter saw, and any of these features make it a great tool for just about any workshop. For instance, it could be mentioned that it has a 15-Amp 3,800 RPM motor that can cut through just about any wood. It can also be mentioned that this tool has a back fence design that allows it to easily cut 2×16 dimensional lumber at 90-degrees or 2×12 dimensional lumber at 45-degrees. This tool also has a dust collection system that’s capable of collecting up to three-fourths of all of the debris produced by the cutting process.

Here are more recommendations from Amazon: